FA+
Shop
16 submissions
My rig I did from scratch a few months ago, Started life as a CM Elite 334+Window,was completely striped down, respraid black,the 3.5" hard drive tray was removed,case was lined with black pyramid rubber vinyl(best seen on 3rd pic)
* CM 334 http://www.coolermaster-usa.com/product.php?category_id=19&product_id=2868
* Jetway XBLUE-P31 Motherboard (Temporary) http://www.jetway.com.tw/jw/product_pic ... =XBLUE-P31
* Core 2 Duo E5200 (Overclocked to 3.55Ghz Stable 24/7)
* 80GB Seagate Hard Drive
* 2x 1.5TB Seagate Hard Drives
* 2x 1GB Kingston DDR800
* MSI 8800 GT oc edition
* Old Procase 500W psu I re sleeved ages ago but never used
* Asus fan speed controller (modded to run both front fans,and installed onto grill)
* 120mm Fan bay for 5 1/4" drive
* Some Green led fans I never used
Previous: http://www.furaffinity.net/view/2556535
Next Picture: http://www.furaffinity.net/view/2556579
Worklog: http://forums.pcformat.co.za/viewtopic.php?f=56&t=35346 (highly Recomended,with lots of extra pics and a full brake down)
PS Hope the mods don't mind the "Desktop" section being taken literally :P
* CM 334 http://www.coolermaster-usa.com/product.php?category_id=19&product_id=2868
* Jetway XBLUE-P31 Motherboard (Temporary) http://www.jetway.com.tw/jw/product_pic ... =XBLUE-P31
* Core 2 Duo E5200 (Overclocked to 3.55Ghz Stable 24/7)
* 80GB Seagate Hard Drive
* 2x 1.5TB Seagate Hard Drives
* 2x 1GB Kingston DDR800
* MSI 8800 GT oc edition
* Old Procase 500W psu I re sleeved ages ago but never used
* Asus fan speed controller (modded to run both front fans,and installed onto grill)
* 120mm Fan bay for 5 1/4" drive
* Some Green led fans I never used
Previous: http://www.furaffinity.net/view/2556535
Next Picture: http://www.furaffinity.net/view/2556579
Worklog: http://forums.pcformat.co.za/viewtopic.php?f=56&t=35346 (highly Recomended,with lots of extra pics and a full brake down)
PS Hope the mods don't mind the "Desktop" section being taken literally :P
Category Desktops / All
Species Unspecified / Any
Size 700 x 763px
File Size 225.3 kB
The original idea behind the rig was to do it for as cheap as possible,and to re-use as much of my spares as possible, its my second pc and is used basically just for lanning,I only used 2gigs for now because that's all I could afford at the time,and runs perfectly well on XP,will upgrade to 4gig when upgrading to Windows 7, hopefully sometime soon.
Both Lan and sound is handled onboard ;),its good enough for a lan box.
Both Lan and sound is handled onboard ;),its good enough for a lan box.
800W Would have been overkill, at the moment the pc doesnt even peak over 290watt according to a kilowatt meter, and is still in spec according to http://www.antec.outervision.com/PSUEngine ,It uses a 45nm CPU and doesn't have a cdrom or any expansion cards so it does save quite a bit,Would have been a different story if it was a Q600 with a striker extreme 2 motherboard.
Comments