Views: 99010
Submissions: 463
Favs: 21549
Fursuit Maker | Registered: November 26, 2009 02:43:13 AM
Suit comissions: Closed
https://linktr.ee/keeatah
MATERIAL LOCATOR! Before asking "where did you get ____?" check here ---> http://www.furaffinity.net/journal/7608239/ (If you still can't find it feel free to ask. I don't bite, I promise!)
***NOTE- I do NOT make hands, feet, or bodies on commission! These items can only be obtained form me as part of a partial or full suit. The one exception being if you have commissioned me in the past and are adding to said commission.
Currently closed for commissions but open for quotes
Heads- start at $1200 I need half down
Semi-Partials- start at $2000 I need half down
Full suits- start at $4000 I need half down
Resin Blanks:Available on our shopify!
https://kandorin-creations.myshopify.com/
Bases currently available:
Medium cat: http://www.furaffinity.net/view/12626390/
Fox/ Medium canine: http://www.furaffinity.net/view/9617229/
Sight hound: http://www.furaffinity.net/view/15995948/
Caribou: https://twitter.com/Keeatah/status/.....80275352219648
Big cat (lion/tiger): https://twitter.com/Keeatah/status/.....75580002144258
Equine: https://www.furaffinity.net/view/31875119/
Deer: https://www.furaffinity.net/view/32636941/
http://www.plus3defense.com/how-to-make-a-dtd Note: This tutorial was made by another fursuit builder and varies slighting from my requirements!! You must build DTD to go over your heels!
http://www.roofur.com/commission/dtd_info.php Note: This tutorial was made by another fursuit builder and varies slighting from my requirements!! You must build DTD on a painters suit and not pajamas!
*DTD's must be at LEAST three layers thick. If they are too thin they tend to fall apart and stretch making them useless. Note: if you hold them up to the light and can see any light coming through them they are too thin! You should not be able to see any of the material from the painters suit coming through the tape. Another way to know if it is too thin is if it doesn't weigh anything. DTD's should take up at LEAST four standard rolls of duct tape.
*DTD's MUST be taped back together, NEATLY, before being shipped to me! If a DTD arrives that has not been taped together or has been taped back together weakly (as in it will break apart if I stuff it) You will be charged a $50 service fee for me having to take my time and materials to assemble it. If It is too thin and I need to add layers there will have a $100 service fees. If you do not wish to pay these fees then be prepared to make and ship another one! (Or just do it right the first time..cause it saves us both a lot of hassle!)
*They must be made over a painters suit, not pajamas or other clothing. Some clothing can be elastic and will warp the duct tape. If the painters suit is not long enough for your arms and legs you can use things like paper towel or plastic bags to extend it.
*The DTD is REQUIRED to go down over your heels at the least. The entire foot is preferred.
*Do not wear anything that stretches under the duck tape. (for example: a stretchy sock under the foot tape. Wrap your foot in a trash bag or paper towel. )
*DO NOT wear a diaper under your DTD.
***ATTENTION!!** DTD's must meet standards to be used. If it does not, it will either need to be repaired or be thrown out and you will be asked to make a new one. If I have to repair it there will be a service fee. I have received too many that have been unusable or would not provide accurate dimensions for the commissioners body. I am not willing to put my time and your money into something that very well may not fit due to the inadequacies of poorly made DTD.
Depending on a case by case basis completion at the soonest could be as low as two to three months. I will NOT commit to anything under a year because my schedule is constantly changing but if you have a date in mind I am willing to try for it pending it's a realistic request. Also, I reserve the right to refuse service or continuation of service if the commissioner is unruly, does not respect my TOS, or become harassing. You MAY NOT make serious changes to your character after I have started building including eye color fur selection and LED colors ect. (You may ask but I make no promises as at this point these will all be done.) I wont be forced to start over because you wish to change something that is already set in stone. Make sure when you commission me you know what character you want and how you want it to look before committing to spending well over a grand and this will save both you and me a lot of frustration. I will NOT make copyrighted characters for commission or purchase. Down payments are not refundable as that is what I use to buy the materials for suits. Production will not start on a suit until they have been paid off. I simply do not have the room to store suits that are completed but cannot be shipped due to not being fully paid off.
I reserve the right to use my images of commissions I have done for displays and advertisements related to my company.
I WILL NOT TOLERATE HARASSMENT OF MY COMMISSIONERS IN ANY WAY SHAPE OR FORM!! IF YOU ARE HARASSING THEM YOU WILL BE BLOCKED AND MY COMMISSIONERS WILL BE ADVISED TO DO THE SAME ACROSS THE BOARD! IF YOU ARE ONE OF MY COMMISSIONERS YOUR COMMISSION WILL BE TERMINATED AND YOU WILL BE REFUNDED AT MY EARLIEST CONVENIENCE!
YOU are responsible for shipping! Shipping is charged after the suits completion as it is the only time I can get an accurate shipping quote. This also assures that when your item is ready to ship you can choose the type pf shipping and speed you prefer. If nothing is specified I will ship USPS express with tracking. I insure all packages over $20 for their worth and will send you the tracking number as soon as your items have been shipped.
I spend time on a farm with horses, cats, dogs, poultry, goats, and reptiles as well as have dogs, cats and reptiles of my own and am constantly coming in contact with them. I you have just a minor allergy please let me know so I can take extra steps to make sure it doesn't become a problem. If you have sever allergies while badges wont be an issue if you are ordering a partial suit or accessories to a suit that require material and fur I advise you that there are dogs and cats in the house and if your health is at risk you may want to consider another artist. I cannot control shedding and can and will not be held liable for something that is a natural function of the pets I keep. I am sorry if this inconveniences anyone.
https://linktr.ee/keeatah
MATERIAL LOCATOR! Before asking "where did you get ____?" check here ---> http://www.furaffinity.net/journal/7608239/ (If you still can't find it feel free to ask. I don't bite, I promise!)
***NOTE- I do NOT make hands, feet, or bodies on commission! These items can only be obtained form me as part of a partial or full suit. The one exception being if you have commissioned me in the past and are adding to said commission.
Currently closed for commissions but open for quotes
Heads- start at $1200 I need half down
Semi-Partials- start at $2000 I need half down
Full suits- start at $4000 I need half down
Resin Blanks:Available on our shopify!
https://kandorin-creations.myshopify.com/
Bases currently available:
Medium cat: http://www.furaffinity.net/view/12626390/
Fox/ Medium canine: http://www.furaffinity.net/view/9617229/
Sight hound: http://www.furaffinity.net/view/15995948/
Caribou: https://twitter.com/Keeatah/status/.....80275352219648
Big cat (lion/tiger): https://twitter.com/Keeatah/status/.....75580002144258
Equine: https://www.furaffinity.net/view/31875119/
Deer: https://www.furaffinity.net/view/32636941/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Duct Tape Dummy Requirements and Tutorialshttp://www.plus3defense.com/how-to-make-a-dtd Note: This tutorial was made by another fursuit builder and varies slighting from my requirements!! You must build DTD to go over your heels!
http://www.roofur.com/commission/dtd_info.php Note: This tutorial was made by another fursuit builder and varies slighting from my requirements!! You must build DTD on a painters suit and not pajamas!
*DTD's must be at LEAST three layers thick. If they are too thin they tend to fall apart and stretch making them useless. Note: if you hold them up to the light and can see any light coming through them they are too thin! You should not be able to see any of the material from the painters suit coming through the tape. Another way to know if it is too thin is if it doesn't weigh anything. DTD's should take up at LEAST four standard rolls of duct tape.
*DTD's MUST be taped back together, NEATLY, before being shipped to me! If a DTD arrives that has not been taped together or has been taped back together weakly (as in it will break apart if I stuff it) You will be charged a $50 service fee for me having to take my time and materials to assemble it. If It is too thin and I need to add layers there will have a $100 service fees. If you do not wish to pay these fees then be prepared to make and ship another one! (Or just do it right the first time..cause it saves us both a lot of hassle!)
*They must be made over a painters suit, not pajamas or other clothing. Some clothing can be elastic and will warp the duct tape. If the painters suit is not long enough for your arms and legs you can use things like paper towel or plastic bags to extend it.
*The DTD is REQUIRED to go down over your heels at the least. The entire foot is preferred.
*Do not wear anything that stretches under the duck tape. (for example: a stretchy sock under the foot tape. Wrap your foot in a trash bag or paper towel. )
*DO NOT wear a diaper under your DTD.
***ATTENTION!!** DTD's must meet standards to be used. If it does not, it will either need to be repaired or be thrown out and you will be asked to make a new one. If I have to repair it there will be a service fee. I have received too many that have been unusable or would not provide accurate dimensions for the commissioners body. I am not willing to put my time and your money into something that very well may not fit due to the inadequacies of poorly made DTD.
FOR THOSE COMMISSIONING ME FOR SUITS!!!Depending on a case by case basis completion at the soonest could be as low as two to three months. I will NOT commit to anything under a year because my schedule is constantly changing but if you have a date in mind I am willing to try for it pending it's a realistic request. Also, I reserve the right to refuse service or continuation of service if the commissioner is unruly, does not respect my TOS, or become harassing. You MAY NOT make serious changes to your character after I have started building including eye color fur selection and LED colors ect. (You may ask but I make no promises as at this point these will all be done.) I wont be forced to start over because you wish to change something that is already set in stone. Make sure when you commission me you know what character you want and how you want it to look before committing to spending well over a grand and this will save both you and me a lot of frustration. I will NOT make copyrighted characters for commission or purchase. Down payments are not refundable as that is what I use to buy the materials for suits. Production will not start on a suit until they have been paid off. I simply do not have the room to store suits that are completed but cannot be shipped due to not being fully paid off.
I reserve the right to use my images of commissions I have done for displays and advertisements related to my company.
I WILL NOT TOLERATE HARASSMENT OF MY COMMISSIONERS IN ANY WAY SHAPE OR FORM!! IF YOU ARE HARASSING THEM YOU WILL BE BLOCKED AND MY COMMISSIONERS WILL BE ADVISED TO DO THE SAME ACROSS THE BOARD! IF YOU ARE ONE OF MY COMMISSIONERS YOUR COMMISSION WILL BE TERMINATED AND YOU WILL BE REFUNDED AT MY EARLIEST CONVENIENCE!
SHIPPING YOU are responsible for shipping! Shipping is charged after the suits completion as it is the only time I can get an accurate shipping quote. This also assures that when your item is ready to ship you can choose the type pf shipping and speed you prefer. If nothing is specified I will ship USPS express with tracking. I insure all packages over $20 for their worth and will send you the tracking number as soon as your items have been shipped.
ALLERGEN WARNING!!!!I spend time on a farm with horses, cats, dogs, poultry, goats, and reptiles as well as have dogs, cats and reptiles of my own and am constantly coming in contact with them. I you have just a minor allergy please let me know so I can take extra steps to make sure it doesn't become a problem. If you have sever allergies while badges wont be an issue if you are ordering a partial suit or accessories to a suit that require material and fur I advise you that there are dogs and cats in the house and if your health is at risk you may want to consider another artist. I cannot control shedding and can and will not be held liable for something that is a natural function of the pets I keep. I am sorry if this inconveniences anyone.
Featured Submission
Stats
Comments Earned: 7511
Comments Made: 4728
Journals: 143
Comments Made: 4728
Journals: 143
Featured Journal
Material guide (G)
10 years ago
Respirators:
https://www.amazon.com/3M-Respirato...../dp/B007JZ1N00
https://www.amazon.com/dp/B009POIVG2/?coliid=IPQ6XESO9CVMG&colid=3H45J93EMSGGH&psc=0&ref_=lv_ov_lig_dp_it
Cartridges (for respirator)
https://www.amazon.com/3M-Cartridge...../dp/B009POHLRC
Fragile Labels:
https://www.amazon.com/gp/product/B072HJTTR7/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01AP8KVZU/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Gloves: (For casting)
https://www.uline.com/BL_6723/Uline.....Nitrile+Gloves
Scissors:
https://www.amazon.com/gp/product/B001IKCGLM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B002PIE4JI/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Utility knife:
https://www.lowes.com/pd/Stanley-1-.....ife/1000035541
Utility blades:
https://www.menards.com/main/tools-hardware/hand-tools/utility-knives/masterforce-trade-utility-knife-blade-dispenser-110-pack/te03-012men/p-1444433976639-c-1484756386273.htm?tid=-7534361254863756187&ipos=2
Sharpies: (tracing out patterns on fur)
Black:
https://www.newegg.com/sharpie-30001-markers/p/N82E16848001619?Description=black%20sharpie&cm_re=black_sharpie-_-48-001-619-_-Product
Silver:
https://www.newegg.com/Product/Product.aspx?Item=9SIA86E4MT1970&cm_re=silver_sharpie-_-48-001-684-_-Product
https://www.amazon.com/gp/product/B01N4TZSSO/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Ribbon: (belt loops on tails){I prefer 1" but I can only find 1 1/2" online but it works nicely as well!}
https://ribbons.com/solid-color-gro.....bbon/id=106699
Paint: (silicon coloring, mask painting, eye painting, some drybrushing)
https://www.amazon.com/FolkArt-Multi-Surface-Metallic-Assorted-6308/dp/B071P25F49/ref=asc_df_B071P25F49/?tag=hyprod-20&linkCode=df0&hvadid=366384183992&hvpos=1o14&hvnetw=g&hvrand=11637775873813884435&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-822542135724&psc=1&tag=&ref=&adgrpid=77370842598&hvpone=&hvptwo=&hvadid=366384183992&hvpos=1o14&hvnetw=g&hvrand=11637775873813884435&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-822542135724
https://www.amazon.com/FolkArt-Acrylic-2-Ounce-PROMOFAI-Colors/dp/B00ATJSDHE/ref=sr_1_4?keywords=folkart+multisurface+acrylic+paint&qid=1565848669&s=arts-crafts&sr=1-4
https://www.amazon.com/FolkArt-Surface-Acrylic-PROMOMSB16-Bright/dp/B076CJYFZ1/ref=sr_1_2?keywords=folkart+multisurface+acrylic+paint&qid=1565848700&s=arts-crafts&sr=1-2
https://www.amazon.com/FolkArt-PROMOFAMET-Metallic-Paint-Piece/dp/B076CJXYLL/ref=sr_1_3?keywords=FolkArt+Multi+Surface+Acrylic+Paint+metalic&qid=1565848488&s=arts-crafts&sr=1-3
https://plaidonline.com/products/fo.....saAoQsEALw_wcB
Tooth brushes: (Why? Because they are GREAT for grooming and paint blending in places normal slicker bushes do not fit such as eye sockets and between horns)
https://www.walmart.com/ip/Colgate-.....Count/55332696
Paint Brushes: ( I prefer to dry brush over airbrushing, I have had the best results with both painting and clean up with plastic handled synthetic bristle paint brushes.)
https://www.walmart.com/ip/Royal-Br.....of-5/113751282
https://www.walmart.com/ip/12-Gold-.....-New/970371121
https://www.walmart.com/ip/Royal-Br.....of-5/196721309
https://www.hsn.com/products/donna-.....riant=8811637#
Clay:
(sculpting resin base forms) {this is a permanently solft clay}
https://www.dickblick.com/products/sculpture-house-prima-plastilina-clay/?clickTracking=true&wmcp=pla&wmcid=items&wmckw=33221-1007&gclid=Cj0KCQjw5qrXBRC3ARIsAJq3bwrm7PhXOemjFaqWGXWtfwnD-hMAZp69Tvz-D3HJ-1XUOP8uYUW1VtoaArb1EALw_wcB
(Sculpting teeth, tongues) {This is a bake-able clay}
http://www.michaels.com/sculpey-3-oven-bake-clay-2oz/10605980.html?cm_mmc=PLASearch-_-google-_-MICH_National_PLA_Shopping_Null_Null_All+Products_General-_-All-Products&gclid=Cj0KCQjw5qrXBRC3ARIsAJq3bwoTDZGCAjUwx8BMV5o-0R8KPTL1p2KA8LWmFKxTzKWF5ynduGetyUMaAtUtEALw_wcB
(Monster Clay) {This clay is great for detail sculpting on jawsets and similar items.}
https://www.amazon.com/Monster-Clay-Premium-Grade-Modeling/dp/B0722NKKYF/ref=asc_df_B0722NKKYF/?tag=hyprod-20&linkCode=df0&hvadid=309821152229&hvpos=1o1&hvnetw=g&hvrand=6777117396926607937&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-571451592141&psc=1&tag=&ref=&adgrpid=60440167143&hvpone=&hvptwo=&hvadid=309821152229&hvpos=1o1&hvnetw=g&hvrand=6777117396926607937&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-571451592141
Apoxie Sculpt:
(the clay I use for lips. jowls, and custom eyelids. )
(black)
http://www.amazon.com/Apoxie-Sculpt-Lb-Epoxy-Clay/dp/B000V5C18I/ref=sr_1_6?ie=UTF8&qid=1445993622&sr=8-6&keywords=apoxie+sculpt
(pink, the color I use on albino characters)
http://www.amazon.com/Apoxie-Sculpt-1-Lb-Pink/dp/B005JKMNTC/ref=sr_1_1?ie=UTF8&qid=1445993766&sr=8-1&keywords=apoxie+sculpt+pink
(for when you need to use a lot this is a lighter weight option. Will need to be painted over. )
https://www.smooth-on.com/products/free-form-air/
https://www.amazon.com/dp/B00IEKMF9C/?coliid=I3GE3W0PLO0V8U&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Hinge material:
(The shutter samples work really nice, can be cut with scissors, come with pre-drilled holes for hardware, and will not squeak or snap like resin)
(Not to mention you can get them at Menards for free!)
http://www.exteriorsolutions.com/p-.....or-chips.aspx?
Foamies:
(5mm thick-ear forms-black)
http://www.hobbylobby.com/Crafts-%2.....Sheet/p/111098
(3mm thick- chin liner and eye protectors-black)
https://www.amazon.com/Bulk-Buy-Foamies-10-Pack-1184-51/dp/B00KDMX9MQ/ref=sr_1_1?ie=UTF8&qid=1525383936&sr=8-1&keywords=foamies+3mm
Duck Tape:
(For DTD's)
https://www.amazon.com/Duck-1017800.....ef_=ast_sto_dp
(For everything else)
https://www.amazon.com/Duck-394468-.....ef_=ast_sto_dp
Hot glue:
https://glu-stix-online.com/product.....=7934735777845
Eye Blanks:
(Med Feline, Med Canine, Big Cat, Sight Hound blanks take 1 1/4" )
(Horse, Caribou, Deer Blanks take 1 1/2")
http://www.delviesplastics.com/p/Ha.....ound_Ball.html
or
http://www.usplastic.com/catalog/item.aspx?itemid=23376&clickid=redirect
or
http://www.tapplastics.com/product/....._cabochons/139
Mannequins:
https://www.compositeeffects.com/pr.....display-forms/
or
https://www.monstermakers.com/sculpting-armatures/
Liquid Latex:
(For hooves)
http://www.monstermakers.com/produc.....ack-Masks.html
Silicone:
(for pawpads and tongues) {Dragonskin fx pro}
https://www.smooth-on.com/products/.....n-skin-fx-pro/
(for brush on molds like resin bases) {Rebound 25}
https://www.smooth-on.com/products/rebound-25/
(For pour molds like claws and teeth) {MoldStar 30}
https://www.smooth-on.com/products/mold-star-30/
Silicone thickeners:
Thi-Vex (eye dropper bottle size you only need a couple of drops)
https://www.smooth-on.com/products/thi-vex/
Silicone tub opener:
(Your gonna want this to open the gallon tubs. It's damn near impossible without it)
https://www.amazon.com/ABN-Plastic-Gallon-Bucket-Opener/dp/B0176J6CEK/ref=s9_simh_gw_g79_i1_r?_encoding=UTF8&fpl=fresh&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=RHR1CWQ4DZZ9YRZ1Z2M4&pf_rd_t=36701&pf_rd_p=1cded295-23b4-40b1-8da6-7c1c9eb81d33&pf_rd_i=desktop
Resin:
{Smooth cast 300 }
https://www.smooth-on.com/products/.....ooth-cast-300/
{Smooth cast 325 color match}
https://www.smooth-on.com/products/.....ooth-cast-325/
{smooth cast Onyx}
https://www.smooth-on.com/products/.....ast-onyx-fast/
Resin dyes and fillers:
(added to uncured resin)
https://www.smooth-on.com/products/ignite/
https://www.smooth-on.com/products/so-strong/
https://www.smooth-on.com/products/cast-magic/
https://www.smooth-on.com/products/glow-worm/
https://www.smooth-on.com/products/cryptolyte/
https://www.smooth-on.com/products/quarry-tone/
Fur:
http://fursuitsupplies.com/
http://www.imstuffedfur.com/_index.php
https://crscrafts.com/bear-supplies.....ux-fur-bs.html
http://bigzfabric.com/index.php/fab.....le-fabric.html
https://www.mendels.com/Long/
http://www.usaknit.us.com/category-s/70.htm
https://www.howlfabrics.com/
Kanekalon:
(for wefting long hair or manes)
http://www.doctoredlocks.com/kaneka.....mbo-braid.html
http://www.clothdollsupply.com/Cate.....Synthetic+Hair
https://www.amazon.com/Braiding-Extensions-Kanekalon-Crochet-Temperature/dp/B085H9WKV9/ref=sr_1_38?crid=1XRMXOJUZK2L9&dchild=1&keywords=kanekalon%2Bbraiding%2Bhair&qid=1592671844&sprefix=kane%2Caps%2C167&sr=8-38&th=1
https://www.amazon.com/Synthetic-Kanekalon-Extension-Decoration-Dreadlock/dp/B07B7K9J17/ref=pd_vtp_194_2/135-8342439-9270106?_encoding=UTF8&pd_rd_i=B07B7K9J17&pd_rd_r=e55a1c1b-625c-4820-8e44-da1921403e8d&pd_rd_w=tGqwq&pd_rd_wg=adVcs&pf_rd_p=2cb32f1c-664d-40e6-93b2-b3f03f8868b6&pf_rd_r=48FTBQ1E03WC8QWZJN3R&psc=1&refRID=48FTBQ1E03WC8QWZJN3R
https://www.ebay.com/i/332649467721?ul_noapp=true
Shavers:
(For shaving the fur on faces)
http://www.walmart.com/ip/11035640?wmlspartner=wlpa&selectedSellerId=0&adid=22222222227000046269&wl0=&wl1=g&wl2=c&wl3=40341931592&wl4=&wl5=pla&wl6=78301784072&veh=sem
High density foam: ((WAIT FOR IT TO GO ON SALE!! Joann's regularly has foam 50-70% off. If you pay more then this you are getting screwed. ))
http://www.joann.com/search?q=foam
Shoe Goo:
(for putting bottoms on feet)
https://www.walmart.com/ip/Shoe-Goo.....Clear/21129799
E6000:
(What I use to attach crystal accents)
http://www.walmart.com/ip/Eclectic-.....esive/24692833
Spay adhesive:
(Used for my gold earliners)
http://www.uline.com/BL_8103/3M-Super-77-Adhesive?pricode=WO547&AdKeyword=3m%20super%2077&AdMatchtype=e&gclid=CjwKEAjwya-6BRDR3p6FuY2-u3MSJAD1paxTJD4q7kd8x3NFW-N7XGlQpU5jvwQmuFgJAnUvS2an5xoCU-vw_wcB&gclsrc=aw.ds
Primer:
(black)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-semi-gloss-black-spray-paint-12-oz/249061/p-1444452974363-c-8050.htm?tid=7563345664800392490&ipos=13
(white)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-semi-gloss-white-spray-paint-12-oz/249060/p-1444452967330-c-8050.htm?tid=-3189301363481295066&ipos=9
Sealer
(semi gloss)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-clear-semi-gloss-spray-paint-12-oz/249859/p-1444452983498-c-8050.htm?tid=-2500712880617601582&ipos=28
(matte)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-clear-matte-spray-paint-12-oz/249087/p-1444452947362-c-8050.htm?tid=8400394094835955511&ipos=6
(gloss)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-clear-gloss-spray-paint-12-oz/249117/p-1444452956805-c-8050.htm?tid=8400394094835955511&ipos=4
Sewing machine I use:
(there are better machines out there but this is a great starter machine! I have 3 of them!)
https://www.amazon.com/4423-Extra-High-Machine-Stainless-Bedplate/dp/B003VWXZQ0/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1489428787&sr=8-1&keywords=singer+4423
Sewing machine needles:
https://www.amazon.com/dp/B00N7ZW1UM/?coliid=I2KICGFZM0GUEX&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Bobbins:
https://www.amazon.com/dp/B077M4BSWZ/?coliid=I3FXMYYIORLZWW&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Thread:
White:
https://www.walmart.com/ip/Guterman.....White/24626280
Black:
https://www.walmart.com/ip/Guterman.....Black/24626278
Heat gun:
(Cutting bases is SO much easier with this)
https://www.amazon.com/Wagner-0503008-HT1000-200-watt-Heat/dp/B00004TUCV/ref=sr_1_1?ie=UTF8&qid=1489428944&sr=8-1&keywords=wagner+heat+gun
Or
https://www.amazon.com/dp/B078S5QMFG/?coliid=I5AZ6GNHNVBKQ&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Sand Paper: (For eye sockets and EVA foam edging)
https://www.amazon.com/3M-26180CP-P-G-No-Slip-Advanced-Sandpaper/dp/B00M12NH5A/ref=sr_1_40?dchild=1&keywords=sandpaper&qid=1592674576&sr=8-40
Sanders: (for sanding edges on bases and claws)
https://www.amazon.com/Rockwell-Belt-Disc-Combo-Sander/dp/B002CJLV0A/ref=sr_1_5?dchild=1&keywords=disc+sander+shop+series&qid=1592674277&sr=8-5
https://www.amazon.com/WEN-6510T-Oscillating-Spindle-Sander/dp/B07KKXNWWX/ref=sr_1_3?dchild=1&keywords=oscilating+sander&qid=1592674371&sr=8-3
https://www.amazon.com/WEN-6515T-Belt-Sander-Sanding/dp/B07KL4BQF5/ref=sr_1_12?dchild=1&keywords=belt+sander&qid=1592674393&sr=8-12
Dremel:
(Needed for cutting bases)
https://www.amazon.com/Dremel-3000-2-28-Attachments-Accessories/dp/B005JRJE7Y/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1489429086&sr=1-1&keywords=dremel+3000
https://www.amazon.com/Dremel-4000-2-30-120-Volt-Variable/dp/B002L3RUVG/ref=sr_1_1?s=hi&ie=UTF8&qid=1522369167&sr=1-1&keywords=dremel+4000&dpID=41NjGPOvpFL&preST=_SY300_QL70_&dpSrc=srch
Dremel Sanding head: (for smoothing cut edges on bases)
https://www.amazon.com/Dremel-26158193JA-Aluminum-Grinding-pieces/dp/B0035PVTMA/ref=sr_1_104?crid=XXZV6XJMR9I6&dchild=1&keywords=dremel+grinding+stones&qid=1592674118&sprefix=dremel+grinding+stone%2Caps%2C168&sr=8-104
Dremel 1 1/4 cutting wheel (for rounding out eye hols on 1 1/4 " eyed bases)
https://www.amazon.com/Dremel-426-Fiberglass-Reinforced-Cut-Off/dp/B00004UDH9/ref=pd_bxgy_img_2/135-8342439-9270106?_encoding=UTF8&pd_rd_i=B00004UDH9&pd_rd_r=8c315c90-4a95-4351-babb-e7a56ad2ceb7&pd_rd_w=dLMRP&pd_rd_wg=W8nbg&pf_rd_p=4e3f7fc3-00c8-46a6-a4db-8457e6319578&pf_rd_r=9Y7HBM0E8PJXRFC79MJV&psc=1&refRID=9Y7HBM0E8PJXRFC79MJV
Holder:
https://www.amazon.com/Dremel-402-1-8-Mandrels/dp/B0006V6R3W/ref=pd_bxgy_img_3/135-8342439-9270106?_encoding=UTF8&pd_rd_i=B0006V6R3W&pd_rd_r=cbe7ae71-aaea-467b-bda7-2894bf941966&pd_rd_w=NWT4D&pd_rd_wg=KxrxQ&pf_rd_p=4e3f7fc3-00c8-46a6-a4db-8457e6319578&pf_rd_r=1D9ANK9NHFF7FC0ZB8TV&psc=1&refRID=1D9ANK9NHFF7FC0ZB8TV
Dremel EZ lock: (for easy switching of cutting blades)
https://www.amazon.com/Dremel-EZ402-EZ-Lock-Mandrel/dp/B000FBLRWE/ref=sr_1_10?crid=2VICDH017QHLA&dchild=1&keywords=dremel+cutting+wheel+ez+lock&qid=1592673482&sprefix=dremel+cutting+whee%2Caps%2C167&sr=8-10
EZ Lock Blades: (For cutting bases)
https://www.amazon.com/Dremel-EZ544-Lock-Cutting-Wheel/dp/B000WMK8FI/ref=sr_1_8?crid=2VICDH017QHLA&dchild=1&keywords=dremel+cutting+wheel+ez+lock&qid=1592673482&sprefix=dremel+cutting+whee%2Caps%2C167&sr=8-8
(for rounding out eye sockets on 1 1/2" eyed bases)
https://www.amazon.com/Dremel-EZ541.....ef_=ast_sto_dp
Glue gun:
(little detail gun)
https://www.amazon.com/Multi-Temp-Cordless-Glue-Gun-White-655688MA/dp/B015TB0946/ref=sr_1_7?ie=UTF8&qid=1489429197&sr=8-7&keywords=ad+tech+hot+glue+gun+cordless
(big gun for large areas like feet)
https://www.amazon.com/FastenMaster-HB-220-Adhesive-Applicator/dp/B00U0L3C4U/ref=sr_1_1?ie=UTF8&qid=1489429279&sr=8-1&keywords=fastenmaster+glue+gun
Horns:
https://dreamvision-creations.mysho.....lections/horns
https://dreamvision-creations.mysho.....ctions/antlers
https://www.etsy.com/shop/TheMonsterForge?ref=simple-shop-header-name&listing_id=680509151 (And other cool products)
https://www.etsy.com/shop/BlackCraneCreations?ref=simple-shop-header-name&listing_id=249193796
Sharps Container:
(You need one of these for stick pins, broken sewing needles and razor blades! DO NOT SIMPLY THROW IN TRASH!)
https://www.amazon.com/dp/B000SOP4UY/?coliid=I2V3IQJXXN88IT&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
**Note these are only what I use, research your project before starting as there may be other materials that can better suit your needs.
*****IF ANY LINKS ARE BROKEN PLEASE LET ME KNOW SO I CAN FIX THEM! Didn't find something, let me know and I will add it if I can find it/vouch for it!
https://www.amazon.com/3M-Respirato...../dp/B007JZ1N00
https://www.amazon.com/dp/B009POIVG2/?coliid=IPQ6XESO9CVMG&colid=3H45J93EMSGGH&psc=0&ref_=lv_ov_lig_dp_it
Cartridges (for respirator)
https://www.amazon.com/3M-Cartridge...../dp/B009POHLRC
Fragile Labels:
https://www.amazon.com/gp/product/B072HJTTR7/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01AP8KVZU/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Gloves: (For casting)
https://www.uline.com/BL_6723/Uline.....Nitrile+Gloves
Scissors:
https://www.amazon.com/gp/product/B001IKCGLM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B002PIE4JI/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Utility knife:
https://www.lowes.com/pd/Stanley-1-.....ife/1000035541
Utility blades:
https://www.menards.com/main/tools-hardware/hand-tools/utility-knives/masterforce-trade-utility-knife-blade-dispenser-110-pack/te03-012men/p-1444433976639-c-1484756386273.htm?tid=-7534361254863756187&ipos=2
Sharpies: (tracing out patterns on fur)
Black:
https://www.newegg.com/sharpie-30001-markers/p/N82E16848001619?Description=black%20sharpie&cm_re=black_sharpie-_-48-001-619-_-Product
Silver:
https://www.newegg.com/Product/Product.aspx?Item=9SIA86E4MT1970&cm_re=silver_sharpie-_-48-001-684-_-Product
https://www.amazon.com/gp/product/B01N4TZSSO/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Ribbon: (belt loops on tails){I prefer 1" but I can only find 1 1/2" online but it works nicely as well!}
https://ribbons.com/solid-color-gro.....bbon/id=106699
Paint: (silicon coloring, mask painting, eye painting, some drybrushing)
https://www.amazon.com/FolkArt-Multi-Surface-Metallic-Assorted-6308/dp/B071P25F49/ref=asc_df_B071P25F49/?tag=hyprod-20&linkCode=df0&hvadid=366384183992&hvpos=1o14&hvnetw=g&hvrand=11637775873813884435&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-822542135724&psc=1&tag=&ref=&adgrpid=77370842598&hvpone=&hvptwo=&hvadid=366384183992&hvpos=1o14&hvnetw=g&hvrand=11637775873813884435&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-822542135724
https://www.amazon.com/FolkArt-Acrylic-2-Ounce-PROMOFAI-Colors/dp/B00ATJSDHE/ref=sr_1_4?keywords=folkart+multisurface+acrylic+paint&qid=1565848669&s=arts-crafts&sr=1-4
https://www.amazon.com/FolkArt-Surface-Acrylic-PROMOMSB16-Bright/dp/B076CJYFZ1/ref=sr_1_2?keywords=folkart+multisurface+acrylic+paint&qid=1565848700&s=arts-crafts&sr=1-2
https://www.amazon.com/FolkArt-PROMOFAMET-Metallic-Paint-Piece/dp/B076CJXYLL/ref=sr_1_3?keywords=FolkArt+Multi+Surface+Acrylic+Paint+metalic&qid=1565848488&s=arts-crafts&sr=1-3
https://plaidonline.com/products/fo.....saAoQsEALw_wcB
Tooth brushes: (Why? Because they are GREAT for grooming and paint blending in places normal slicker bushes do not fit such as eye sockets and between horns)
https://www.walmart.com/ip/Colgate-.....Count/55332696
Paint Brushes: ( I prefer to dry brush over airbrushing, I have had the best results with both painting and clean up with plastic handled synthetic bristle paint brushes.)
https://www.walmart.com/ip/Royal-Br.....of-5/113751282
https://www.walmart.com/ip/12-Gold-.....-New/970371121
https://www.walmart.com/ip/Royal-Br.....of-5/196721309
https://www.hsn.com/products/donna-.....riant=8811637#
Clay:
(sculpting resin base forms) {this is a permanently solft clay}
https://www.dickblick.com/products/sculpture-house-prima-plastilina-clay/?clickTracking=true&wmcp=pla&wmcid=items&wmckw=33221-1007&gclid=Cj0KCQjw5qrXBRC3ARIsAJq3bwrm7PhXOemjFaqWGXWtfwnD-hMAZp69Tvz-D3HJ-1XUOP8uYUW1VtoaArb1EALw_wcB
(Sculpting teeth, tongues) {This is a bake-able clay}
http://www.michaels.com/sculpey-3-oven-bake-clay-2oz/10605980.html?cm_mmc=PLASearch-_-google-_-MICH_National_PLA_Shopping_Null_Null_All+Products_General-_-All-Products&gclid=Cj0KCQjw5qrXBRC3ARIsAJq3bwoTDZGCAjUwx8BMV5o-0R8KPTL1p2KA8LWmFKxTzKWF5ynduGetyUMaAtUtEALw_wcB
(Monster Clay) {This clay is great for detail sculpting on jawsets and similar items.}
https://www.amazon.com/Monster-Clay-Premium-Grade-Modeling/dp/B0722NKKYF/ref=asc_df_B0722NKKYF/?tag=hyprod-20&linkCode=df0&hvadid=309821152229&hvpos=1o1&hvnetw=g&hvrand=6777117396926607937&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-571451592141&psc=1&tag=&ref=&adgrpid=60440167143&hvpone=&hvptwo=&hvadid=309821152229&hvpos=1o1&hvnetw=g&hvrand=6777117396926607937&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018845&hvtargid=pla-571451592141
Apoxie Sculpt:
(the clay I use for lips. jowls, and custom eyelids. )
(black)
http://www.amazon.com/Apoxie-Sculpt-Lb-Epoxy-Clay/dp/B000V5C18I/ref=sr_1_6?ie=UTF8&qid=1445993622&sr=8-6&keywords=apoxie+sculpt
(pink, the color I use on albino characters)
http://www.amazon.com/Apoxie-Sculpt-1-Lb-Pink/dp/B005JKMNTC/ref=sr_1_1?ie=UTF8&qid=1445993766&sr=8-1&keywords=apoxie+sculpt+pink
(for when you need to use a lot this is a lighter weight option. Will need to be painted over. )
https://www.smooth-on.com/products/free-form-air/
https://www.amazon.com/dp/B00IEKMF9C/?coliid=I3GE3W0PLO0V8U&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Hinge material:
(The shutter samples work really nice, can be cut with scissors, come with pre-drilled holes for hardware, and will not squeak or snap like resin)
(Not to mention you can get them at Menards for free!)
http://www.exteriorsolutions.com/p-.....or-chips.aspx?
Foamies:
(5mm thick-ear forms-black)
http://www.hobbylobby.com/Crafts-%2.....Sheet/p/111098
(3mm thick- chin liner and eye protectors-black)
https://www.amazon.com/Bulk-Buy-Foamies-10-Pack-1184-51/dp/B00KDMX9MQ/ref=sr_1_1?ie=UTF8&qid=1525383936&sr=8-1&keywords=foamies+3mm
Duck Tape:
(For DTD's)
https://www.amazon.com/Duck-1017800.....ef_=ast_sto_dp
(For everything else)
https://www.amazon.com/Duck-394468-.....ef_=ast_sto_dp
Hot glue:
https://glu-stix-online.com/product.....=7934735777845
Eye Blanks:
(Med Feline, Med Canine, Big Cat, Sight Hound blanks take 1 1/4" )
(Horse, Caribou, Deer Blanks take 1 1/2")
http://www.delviesplastics.com/p/Ha.....ound_Ball.html
or
http://www.usplastic.com/catalog/item.aspx?itemid=23376&clickid=redirect
or
http://www.tapplastics.com/product/....._cabochons/139
Mannequins:
https://www.compositeeffects.com/pr.....display-forms/
or
https://www.monstermakers.com/sculpting-armatures/
Liquid Latex:
(For hooves)
http://www.monstermakers.com/produc.....ack-Masks.html
Silicone:
(for pawpads and tongues) {Dragonskin fx pro}
https://www.smooth-on.com/products/.....n-skin-fx-pro/
(for brush on molds like resin bases) {Rebound 25}
https://www.smooth-on.com/products/rebound-25/
(For pour molds like claws and teeth) {MoldStar 30}
https://www.smooth-on.com/products/mold-star-30/
Silicone thickeners:
Thi-Vex (eye dropper bottle size you only need a couple of drops)
https://www.smooth-on.com/products/thi-vex/
Silicone tub opener:
(Your gonna want this to open the gallon tubs. It's damn near impossible without it)
https://www.amazon.com/ABN-Plastic-Gallon-Bucket-Opener/dp/B0176J6CEK/ref=s9_simh_gw_g79_i1_r?_encoding=UTF8&fpl=fresh&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=RHR1CWQ4DZZ9YRZ1Z2M4&pf_rd_t=36701&pf_rd_p=1cded295-23b4-40b1-8da6-7c1c9eb81d33&pf_rd_i=desktop
Resin:
{Smooth cast 300 }
https://www.smooth-on.com/products/.....ooth-cast-300/
{Smooth cast 325 color match}
https://www.smooth-on.com/products/.....ooth-cast-325/
{smooth cast Onyx}
https://www.smooth-on.com/products/.....ast-onyx-fast/
Resin dyes and fillers:
(added to uncured resin)
https://www.smooth-on.com/products/ignite/
https://www.smooth-on.com/products/so-strong/
https://www.smooth-on.com/products/cast-magic/
https://www.smooth-on.com/products/glow-worm/
https://www.smooth-on.com/products/cryptolyte/
https://www.smooth-on.com/products/quarry-tone/
Fur:
http://fursuitsupplies.com/
http://www.imstuffedfur.com/_index.php
https://crscrafts.com/bear-supplies.....ux-fur-bs.html
http://bigzfabric.com/index.php/fab.....le-fabric.html
https://www.mendels.com/Long/
http://www.usaknit.us.com/category-s/70.htm
https://www.howlfabrics.com/
Kanekalon:
(for wefting long hair or manes)
http://www.doctoredlocks.com/kaneka.....mbo-braid.html
http://www.clothdollsupply.com/Cate.....Synthetic+Hair
https://www.amazon.com/Braiding-Extensions-Kanekalon-Crochet-Temperature/dp/B085H9WKV9/ref=sr_1_38?crid=1XRMXOJUZK2L9&dchild=1&keywords=kanekalon%2Bbraiding%2Bhair&qid=1592671844&sprefix=kane%2Caps%2C167&sr=8-38&th=1
https://www.amazon.com/Synthetic-Kanekalon-Extension-Decoration-Dreadlock/dp/B07B7K9J17/ref=pd_vtp_194_2/135-8342439-9270106?_encoding=UTF8&pd_rd_i=B07B7K9J17&pd_rd_r=e55a1c1b-625c-4820-8e44-da1921403e8d&pd_rd_w=tGqwq&pd_rd_wg=adVcs&pf_rd_p=2cb32f1c-664d-40e6-93b2-b3f03f8868b6&pf_rd_r=48FTBQ1E03WC8QWZJN3R&psc=1&refRID=48FTBQ1E03WC8QWZJN3R
https://www.ebay.com/i/332649467721?ul_noapp=true
Shavers:
(For shaving the fur on faces)
http://www.walmart.com/ip/11035640?wmlspartner=wlpa&selectedSellerId=0&adid=22222222227000046269&wl0=&wl1=g&wl2=c&wl3=40341931592&wl4=&wl5=pla&wl6=78301784072&veh=sem
High density foam: ((WAIT FOR IT TO GO ON SALE!! Joann's regularly has foam 50-70% off. If you pay more then this you are getting screwed. ))
http://www.joann.com/search?q=foam
Shoe Goo:
(for putting bottoms on feet)
https://www.walmart.com/ip/Shoe-Goo.....Clear/21129799
E6000:
(What I use to attach crystal accents)
http://www.walmart.com/ip/Eclectic-.....esive/24692833
Spay adhesive:
(Used for my gold earliners)
http://www.uline.com/BL_8103/3M-Super-77-Adhesive?pricode=WO547&AdKeyword=3m%20super%2077&AdMatchtype=e&gclid=CjwKEAjwya-6BRDR3p6FuY2-u3MSJAD1paxTJD4q7kd8x3NFW-N7XGlQpU5jvwQmuFgJAnUvS2an5xoCU-vw_wcB&gclsrc=aw.ds
Primer:
(black)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-semi-gloss-black-spray-paint-12-oz/249061/p-1444452974363-c-8050.htm?tid=7563345664800392490&ipos=13
(white)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-semi-gloss-white-spray-paint-12-oz/249060/p-1444452967330-c-8050.htm?tid=-3189301363481295066&ipos=9
Sealer
(semi gloss)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-clear-semi-gloss-spray-paint-12-oz/249859/p-1444452983498-c-8050.htm?tid=-2500712880617601582&ipos=28
(matte)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-clear-matte-spray-paint-12-oz/249087/p-1444452947362-c-8050.htm?tid=8400394094835955511&ipos=6
(gloss)
https://www.menards.com/main/home-decor/craft-supplies/spray-paint/all-purpose-spray-paint/rust-oleum-reg-painters-touch-reg-2x-clear-gloss-spray-paint-12-oz/249117/p-1444452956805-c-8050.htm?tid=8400394094835955511&ipos=4
Sewing machine I use:
(there are better machines out there but this is a great starter machine! I have 3 of them!)
https://www.amazon.com/4423-Extra-High-Machine-Stainless-Bedplate/dp/B003VWXZQ0/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1489428787&sr=8-1&keywords=singer+4423
Sewing machine needles:
https://www.amazon.com/dp/B00N7ZW1UM/?coliid=I2KICGFZM0GUEX&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Bobbins:
https://www.amazon.com/dp/B077M4BSWZ/?coliid=I3FXMYYIORLZWW&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Thread:
White:
https://www.walmart.com/ip/Guterman.....White/24626280
Black:
https://www.walmart.com/ip/Guterman.....Black/24626278
Heat gun:
(Cutting bases is SO much easier with this)
https://www.amazon.com/Wagner-0503008-HT1000-200-watt-Heat/dp/B00004TUCV/ref=sr_1_1?ie=UTF8&qid=1489428944&sr=8-1&keywords=wagner+heat+gun
Or
https://www.amazon.com/dp/B078S5QMFG/?coliid=I5AZ6GNHNVBKQ&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
Sand Paper: (For eye sockets and EVA foam edging)
https://www.amazon.com/3M-26180CP-P-G-No-Slip-Advanced-Sandpaper/dp/B00M12NH5A/ref=sr_1_40?dchild=1&keywords=sandpaper&qid=1592674576&sr=8-40
Sanders: (for sanding edges on bases and claws)
https://www.amazon.com/Rockwell-Belt-Disc-Combo-Sander/dp/B002CJLV0A/ref=sr_1_5?dchild=1&keywords=disc+sander+shop+series&qid=1592674277&sr=8-5
https://www.amazon.com/WEN-6510T-Oscillating-Spindle-Sander/dp/B07KKXNWWX/ref=sr_1_3?dchild=1&keywords=oscilating+sander&qid=1592674371&sr=8-3
https://www.amazon.com/WEN-6515T-Belt-Sander-Sanding/dp/B07KL4BQF5/ref=sr_1_12?dchild=1&keywords=belt+sander&qid=1592674393&sr=8-12
Dremel:
(Needed for cutting bases)
https://www.amazon.com/Dremel-3000-2-28-Attachments-Accessories/dp/B005JRJE7Y/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1489429086&sr=1-1&keywords=dremel+3000
https://www.amazon.com/Dremel-4000-2-30-120-Volt-Variable/dp/B002L3RUVG/ref=sr_1_1?s=hi&ie=UTF8&qid=1522369167&sr=1-1&keywords=dremel+4000&dpID=41NjGPOvpFL&preST=_SY300_QL70_&dpSrc=srch
Dremel Sanding head: (for smoothing cut edges on bases)
https://www.amazon.com/Dremel-26158193JA-Aluminum-Grinding-pieces/dp/B0035PVTMA/ref=sr_1_104?crid=XXZV6XJMR9I6&dchild=1&keywords=dremel+grinding+stones&qid=1592674118&sprefix=dremel+grinding+stone%2Caps%2C168&sr=8-104
Dremel 1 1/4 cutting wheel (for rounding out eye hols on 1 1/4 " eyed bases)
https://www.amazon.com/Dremel-426-Fiberglass-Reinforced-Cut-Off/dp/B00004UDH9/ref=pd_bxgy_img_2/135-8342439-9270106?_encoding=UTF8&pd_rd_i=B00004UDH9&pd_rd_r=8c315c90-4a95-4351-babb-e7a56ad2ceb7&pd_rd_w=dLMRP&pd_rd_wg=W8nbg&pf_rd_p=4e3f7fc3-00c8-46a6-a4db-8457e6319578&pf_rd_r=9Y7HBM0E8PJXRFC79MJV&psc=1&refRID=9Y7HBM0E8PJXRFC79MJV
Holder:
https://www.amazon.com/Dremel-402-1-8-Mandrels/dp/B0006V6R3W/ref=pd_bxgy_img_3/135-8342439-9270106?_encoding=UTF8&pd_rd_i=B0006V6R3W&pd_rd_r=cbe7ae71-aaea-467b-bda7-2894bf941966&pd_rd_w=NWT4D&pd_rd_wg=KxrxQ&pf_rd_p=4e3f7fc3-00c8-46a6-a4db-8457e6319578&pf_rd_r=1D9ANK9NHFF7FC0ZB8TV&psc=1&refRID=1D9ANK9NHFF7FC0ZB8TV
Dremel EZ lock: (for easy switching of cutting blades)
https://www.amazon.com/Dremel-EZ402-EZ-Lock-Mandrel/dp/B000FBLRWE/ref=sr_1_10?crid=2VICDH017QHLA&dchild=1&keywords=dremel+cutting+wheel+ez+lock&qid=1592673482&sprefix=dremel+cutting+whee%2Caps%2C167&sr=8-10
EZ Lock Blades: (For cutting bases)
https://www.amazon.com/Dremel-EZ544-Lock-Cutting-Wheel/dp/B000WMK8FI/ref=sr_1_8?crid=2VICDH017QHLA&dchild=1&keywords=dremel+cutting+wheel+ez+lock&qid=1592673482&sprefix=dremel+cutting+whee%2Caps%2C167&sr=8-8
(for rounding out eye sockets on 1 1/2" eyed bases)
https://www.amazon.com/Dremel-EZ541.....ef_=ast_sto_dp
Glue gun:
(little detail gun)
https://www.amazon.com/Multi-Temp-Cordless-Glue-Gun-White-655688MA/dp/B015TB0946/ref=sr_1_7?ie=UTF8&qid=1489429197&sr=8-7&keywords=ad+tech+hot+glue+gun+cordless
(big gun for large areas like feet)
https://www.amazon.com/FastenMaster-HB-220-Adhesive-Applicator/dp/B00U0L3C4U/ref=sr_1_1?ie=UTF8&qid=1489429279&sr=8-1&keywords=fastenmaster+glue+gun
Horns:
https://dreamvision-creations.mysho.....lections/horns
https://dreamvision-creations.mysho.....ctions/antlers
https://www.etsy.com/shop/TheMonsterForge?ref=simple-shop-header-name&listing_id=680509151 (And other cool products)
https://www.etsy.com/shop/BlackCraneCreations?ref=simple-shop-header-name&listing_id=249193796
Sharps Container:
(You need one of these for stick pins, broken sewing needles and razor blades! DO NOT SIMPLY THROW IN TRASH!)
https://www.amazon.com/dp/B000SOP4UY/?coliid=I2V3IQJXXN88IT&colid=3H45J93EMSGGH&psc=1&ref_=lv_ov_lig_dp_it
**Note these are only what I use, research your project before starting as there may be other materials that can better suit your needs.
*****IF ANY LINKS ARE BROKEN PLEASE LET ME KNOW SO I CAN FIX THEM! Didn't find something, let me know and I will add it if I can find it/vouch for it!
User Profile
Accepting Trades
No Accepting Commissions
No Character Species
Kandorin Dragon
Favorite Music
Rock/pop, celtic, anything with a good beat that isn't polka
Favorite Games
Shadows of the Colosus
Favorite Gaming Platforms
Steam
Favorite Animals
Dragon
Favorite Site
Youtube
Favorite Foods & Drinks
Prime Rib
Contact Information
MusFuzzie
~musfuzzie
https://www.furaffinity.net/view/43904832/
Feel free to use or post however you wish. <3
https://www.furaffinity.net/view/42383073/
Feel free to use or post however you wish. <3
https://www.furaffinity.net/view/42353440/
Feel free to use or post however you wish. <3
Advertise |
Get FA+ |
Site Status |
Merch Store |
Memorial |
Terms of Service |
Privacy |
Code of Conduct |
Upload Policy
Get FA+ |
Site Status |
Merch Store |
Memorial |
Terms of Service |
Privacy |
Code of Conduct |
Upload Policy
109227 Users online —
8903 guests,
13876 registered
and 86448 other
Limit bot activity to periods with less than 10k registered users online.
© 2005-2026 Frost Dragon Art LLC
Server Time: Apr 20, 2026 05:03 PM